QSC KW152 Active 2 Way PA Speaker, 1000 Watt

Full Description

High Output, High Headroom

Like K Series, each of the four KW Series models features a QSC designed, 1000 watt (2 x 500 W continuous) Class D power module. And continuing in the K Series tradition, every model is fitted with the identical high-output 1.75" HF device (full-range models) and woofers of the same high quality design, regardless of speaker size. This high power also extends this speaker's headroom, allowing you to make bigger, louder mixes with no distortion.

Defined Coverage Area

Consistent sound for your entire audience. QSC's Directivity Matched Transition technology matches the natural high-frequency coverage angle of the KW152's woofer with that of the compression driver at the crossover frequency. This smooth transition means no more lost mids at the edges of the speaker's dispersion angle. With this balanced coverage, the listening area in front of your speakers is filled with the full frequency spectrum of your music, so everyone can experience the sound to its full potential.

Tilt-Direct™

The KW122 and KW152 feature a unique Tilt-Direct™ pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired.

Features

• 15" Woofer; 1.75" diaphragm compression driver
• 60° Nominal coverage angle
• Maximum SPL 133 dB peak
• Also functions as monitor floor wedge
• 1000-watt Class D power modules in all models (2 x 500 W continuous)
• Onboard mixer with two combo XLR and ¼" inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
• Extensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performance
• DMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound field
• Rugged, texture-painted birch enclosures
• Four-position Mic/Line gain (full-range models)
• Tour-grade 16 gauge steel grilles
• Comfortable ergonomic handles
• 35 mm pole sockets with Tilt-Direct™
• M10 rigging points for suspended installation

Extensive DSP enhances system performance

• DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
• Intrinsic Correction™, first featured in our high-end line-array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
• DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
• GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.

Specifications:

• Configuration: 15" 2-way multipurpose
• Transducers: 15" cone transducer, 1.75" diaphragm compression driver
• Frequency Response (-6 dB): 47Hz - 18kHz
• Frequency Range (-10 dB): 44Hz - 20kHz
• Nominal Coverage (-6 dB): 60° axisymmetric
• Maximum SPL: 133 dB peak
• Power Output: 1000W Class D (500W LF, 500W HF) continuous, 2000W peak
• Controls: Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
• Indicators: Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)
• Connectors: Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
• Cooling: On demand, 50 mm variable speed fan
• Amplifier Protection: Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
• Transducer Protection: Thermal limiting, excursion limiting
• AC Power Input: Universal power supply 100-240 VAC, 50 to 60 Hz
• AC Power Consumption (1/8 Power):
  • 100 VAC, 2.3 A
  • 120 VAC, 2.01 A
  • 230 VAC, 1.13 A

Input Impedance:

• Channel A (0dB gain): 38kΩ balanced, 19kΩ unbalanced
• Channel A (+12dB gain): 10kΩ balanced, 5kΩ unbalanced
• Channel A (+24dB gain): 2.66kΩ balanced, 1.33kΩ unbalanced
• Channel A (+36dB gain: 660Ω balanced, 330Ω unbalanced
• Channel B XLR/¼" 38kΩ balanced, 19kΩ unbalanced
• Channel B RCA: 10kΩ

Enclosure:

• Material: 15mm painted birch plywood
• Finish: Black textured paint
• Grille: Black powder coated 16 gauge steel
• Dimensions: 32.1" x 17.5" x 15.2" / 816 mm x 445 mm x 386 mm